Products → Tanks & Kettles → Vertical Tanks
3 identical stainless steel jacketed tank. Tank is 20.5" diameter x 18" deep. Approximately 25 gallons total volume. It has a one piece hinged lid with handle and a clamp to keep it closed. The tank is dished bottom with a centre discharge. There is a 1.25" diameter inlet on the top side of the tank. It also has a thermometer. Outlet is 1 7/8" diameter with a ball valve on the end. The end of the outlet has a threaded connection. The jacket is good for hot water only. In good condition.
All stainless steel jacketed holding tank. Used to hold liquid nitrogen. The outer tank is 39.75" diameter x 28.5" deep. It has a 6" diameter inlet and a 1" diameter bottom centre outlet that drains out the side. The inner tank is 23.5" diameter x 24" deep. There is no outlet in the inner tank. The outer tank is on casters and has handles on one side for easy moving. In very nice condition.
View DetailsModel: 66000 litre
Stainless steel inside and insulated on the outside storage tank. Dimensions are approximately 10' dia (112" tank, 8" insulation) x 31' tall. Approximately 17400 gallons. Last holding water and whey. In good condition.
Stainless Process Equip. Single Wall Mixing Tank
400 US gallons all stainless steel mixing tank with 2 piece hinged lid with bridge. The bridge has 3 - 3.5", 1 - 2.5" and 1 5" x 5" square inlets. The tank is 51.75" diameter x 50" deep side wall & 57" deep at the outlet. It has sweep agitation with paddles on the shaft as well as a baffle from the bridge for better mixing. The tank has a 3.75" diameter outlet with a removable ball valve with a 3.5" outside diameter sani clamp connection attached. Legs are stainless steel as well. In good working condition. Last used in a food facility.
Stainless Fabrication Vertical Tank
View DetailsModel: 250 Gal Solution Prep tank
All stainless steel tank with a dome top and a dished bottom. The top has a 18" diameter manway, 4 sani clamp inlets (2 - 2", 1, 2.5" 1, 4.75" diameter) as well as a 2" diameter sani clamp inlet with a spray ball. There is also an inlet with mounts for a mixer. The tank is 39" diameter x 59" deep. It has a 2" outside diameter sani clamp outlet, that's 20.75" from the floor. There is also a spot for a temperature probe in the bottom. In good condition. Last used in a food facility.