Home Who We Are Send an Inquiry Subscribe Contact Us


Products → Elevators → Cap

Hoppmann Elevator

View DetailsModel: EP-04
Elevators → Cap

This little elevator has a 26" wide x 20.5" long x 18" deep stainless steel hopper. The hopper has a 9" wide x 10" long slide gate if the hopper needs to be emptied. The belt is 6" wide with 1.5" high cleats that are spaced 5.75" apart. Both the hopper and belt have a plastic cover for safety protection. The discharge height of the belt is 59" but the chute is 41" from the floor. It has variable speed controls. In good condition. Last used in a cosmetic facility with other downstream equipment.

US Bottlers Cap Elevator Sorter

View DetailsModel: RC-9-21
Elevators → Cap

Caps are transferred from a holding bin, or “hopper” onto a revolving belt, moving upward at a 90 degree incline. The caps rest on the belts’ flights that are equially spaced. These flights on the belt are designed to keep caps that are oriented in the desired position, while the caps that are not oriented correctly are knocked off of the flights via gravity back into the hopper. Once the correctly oriented caps reach the top of the sorter, they are blown by air into the cap chute, and eventually down to the capper.  A Waterfall sorter is the best-fit for symmetrical, flat, round caps. Flights are spaced 1 3/4" apart. Part of a high speed bottling line. Last used in a pharmaceutical facility.