Products → Mixers
It takes a 7/8" diameter shaft. Comes with a timer and variable speed controls. In good working condition. No shaft with the mixer and there is no stand.
View DetailsModel: XJ-87
Clamp mounted mixer. It takes a 19 mm shaft. No shaft or impeller come with the mixer. In good working condition.
View DetailsModel: ND-2A
Clamp mounted mixer. It has an on / off switch. It takes a 19 mm shaft. No shaft or impeller come with the mixer. It needs a good cleaning but it's in good working condition.
Clamp mounted mixer. It has an on / off switch. It takes a 15 mm shaft. No shaft or impeller come with the mixer. In good working condition.
View DetailsModel: V-1401
This mixer has 4 speed controls, a timer and start / stop buttons. It also has a power bowl lift. It comes with 2 bowls (with carts) and 3 attachments (hook, whisk, & paddle). It has a stainless steel guard that rotates if you need to add product or can be removed for cleaning. It sits on a stainless steel frame. In good condition. Last used in a cheese facility.
This mixer comes with a stainless steel shaft and impeller. The shaft is 42.25" long x 1.25" diameter. The impeller has 1.75" long blades. In good working condition. Last used in a food facility.
Viscous Product Hydraulic Mixer with Filler and Can Seamer
This little systems consists of a 250 gallon double motion hydraulic mixer. It was mixing a very viscous products well over 70,000 cps. The mixer comes with two 250 gallon stainless steel single wall tanks so you can be mixing a batch and filling a batch. There is a pump station with an Aro pump with a follower plate that feeds a single head pistion filler. The hopper on the piston filler is equipped with a level sensor that calls for more product when needed. It was filling 454 gram containers. It takes four cycles to fill 1 container. The containers were then went to a Canco 06 can seamer to be closed. The containers they were filling were a composite can, sizes 401 x 309. In good working condition.