Home Who We Are Send an Inquiry Subscribe Contact Us

Inventory

Products → Tanks & Totes → Vertical Tanks

Cryofab Inc. Jacketed Tank


View Details
Tanks & Totes → Vertical Tanks

All stainless steel jacketed holding tank. Used to hold liquid nitrogen. The outer tank is 39.75" diameter x 28.5" deep (approximately 500 litres). It has a 6" diameter inlet and a 1" diameter bottom centre outlet that drains out the side. The inner tank is 23.5" diameter x 24" deep. There is no outlet in the inner tank. The outer tank is on casters and has handles on one side for easy moving. In very nice condition.

Elizabeth Fabrication Inc. Cone Tanks


View Details
Tanks & Totes → Vertical Tanks

2 identical cone bottom tanks. Each has a 16" diameter manway (missing lids) and a 2" outside diameter sani clamp connection inlet on the domes top. They are 54" diameter x 38" deep. They are pressure rated for up to 30 psi @ 100 deg F. The outlet is 3.5" diameter (inside) with a threaded connection. The outlet is 17" from the floor. Both tanks are in good condition and are on casters but they all need replacing. Last used in a neutraceutical facility.

Inox Industries Pressure Tank


View Details
Tanks & Totes → Vertical Tanks

This all stainless steel pressure tank is has a domed top with 4 - 2" outside diameter sani clamp connections. There is also a 6.5" and 7" outside diameter sani clamp connection inlets. the 6.5" has a sani clamp cover, the 7" is open. The tank is 21.5" diameter inside x 25" deep. Approximately 140 litres (37 gallon) capacity. It has a bottom centre out that comes out the front. The outlet is 2" outside diameter sani clamp connection that's 4" from the floor. It has a working pressure of 75 psi @ 300 deg F. Min temp -20 deg F @ 75 psi. In excellent condition. It has a CRN number M7028.5. The inside the unit doesn't look like it's been used but on the outside someone has spilt paint on it and it needs to be removed. It comes on a set of casters with a handle at the back so you can move it around like a dolly.

WHE Bio-Systems Inc. Dimple Jacketed Pressure Tank


View Details
Tanks & Totes → Vertical Tanks

2 identical stainless steel dimple jacketed tanks with vacuum capabilities with a Lightnin mixer. The tank has a dish top with a 17" manway (certified by Paul Meuller). It has 6 sani clamp inlets (3 - 2.5" and 3 - 2" outside diameter) and a 5" diameter inlet where the Ligthtnin mixer is bolted. The mixer has a 1" diameter shaft that goes to about 6"' from the bottom of the tank with 4.5" long impellers on the end. The inside of the tank is 36" diameter x 71.5" tall with a dished bottom (approximately 300 gallons or 1100 litres). It has a 1.5" diameter centre outlet that comes out the side and is 10.5" from the floor. The outlet is operated with an electronic actuator. The outlet has a 2nd actuator with a diverter line for samples / testing of product. In excellent condition. Last used in a pharmaceutical facility. FV / 50 psi @ 300 deg F. HX 68. MAWP 150. -20 deg F @ 53 psi MDMT. OIN # 5.1042054 & 5.1042053. CRN # K7506.5 & K7506.5.

Crepaco Inc. Jacketed Mix Tank


View Details
Tanks & Totes → Vertical Tanks

This 500 gallon jacketed mixing tank is all stainless steel. It has a domed top with a top mounted mixer. The top has 3 inlets (2 - 2.5" & 1 - 3.5" outside diameter sani clamp connection). It also has manway that's 33.5" wide x 19" deep with a removable cover. The manway cover has a hinged lid that's 19.5" wide x 9.5" tall and also a 3.5" outside diameter sani clamp inlet. The inside of the tank is 66" diameter x 41" deep at the outlet (35" deep sidewall). The mixing shaft is 2" diameter and is connected to the bottom of the tank above the outlet, and has 3 sets of 14" long impellers. There are also 2 baffles (one on either side) of the shaft inside the tank. The tank has a dished bottom with a bottom centre 3.5" outside diameter sani clamp discharge. The discharge would be approximately 33.5" from the floor once the feet were attached. The feet are threaded into the legs for height adjustments and leveling. The jacket is rated for 75 psi. In good condition. Last used in a food facility.

Tank with Mixer


View Details
Tanks & Totes → Vertical Tanks

3 identical all stainless steel tanks tieh air operated mixers. 2 tanks have a 2 piece removable lid, 1 has a 1 piece removable lid. All 3 have a clamping bracket for the mixer. The mixers have 3" impellers. At the top front side of the tanks there is a 2" outside diameter sani clamp connetion inlet. The tanks are 17.5" diameter x 28.75" deep (29.5" at the outlet). Approximately 30 gallons. They all have a bottom side 2" outside diameter sani clamp connection outlet that is 11.25" from the floor. On casters with a handle on one side for easy moving. In very good condition. Last used in a pharmaceutical facility.

Tank with Mixer


View Details
Tanks & Totes → Vertical Tanks

The pictures show 2 tanks but the tank with the 2 piece lid has been sold.

All stainless steel tank with air operated mixer. It has a 1 piece removable lid, and a clamping bracket for the mixer. The mixer has 1.5" impellers. At the top front side of the tank there is a 2" outside diameter sani clamp connetion inlet. The tank is 17.5" diameter x 16.25" deep (16.5" at the outlet). Approximately 17 gallons. It has a bottom side 2" outside diameter sani clamp connection outlet that is 9.5" from the floor. On casters with a handle on both sides for easy moving. In very good condition. Last used in a pharmaceutical facility.