New Arrivals

Our inventory is constantly being updated with newly arrived equipment. We regularly receive machines and parts from a wide range of trusted manufacturers, giving you access to the latest additions to our warehouse. Browse the newest arrivals below to see what has recently come in, and check back often as new items are added frequently.

Mixer

Item #: 21976

Clamp mounted mixer. Takes a 19 mm shaft. Has on / off switch. In good working condition. Last used in a food facility.

Auger

Auger Powder Filler with Screw Auger Feeder

Item #: 21973

Mateer auger powder filler with screw auger feeder. The filler has a hopper with agitation and a lever sensor to start and stop the feeder. It has 1″ tooling (comes

Bundlers

Semi Automatic Bundler & Tunnel

Item #: 21972

Damark semi-automatic sleeve wrapper with Damark S24 shrink tunnel. An operator is required to push the product through the film and activate the sealing system. Top speed of 8 per

Piston

Single Head Piston Filler

Item #: 21397

Air operated single head piston filler on a stand. The hopper is 22″ diameter x 17″ deep. It has a 1 litre piston. The nozzle is 3/8″ diameter and comes

Bundlers

Inline Automatic Shrink Bundler

Item #: 21971

Last running 12 and 24 packs of 0.5 litre PET bottles and 12 packs of 1 litre PET bottles. It’s capable of running pad + film, or film only. It

Tablet Counters

Electronic Tablet / Capsule Counter

Item #: 21969

Electronic channel counter. Dual tray 16 vibratory feeding tracks. Complete with product hopper, syntron vibrators, vacuum pick-off, discharge funnel, also comes with bottle indexing. There is no conveyor with the

Vertical Tanks

Single Wall Tank

Item #: 21966

Stainless steel tank with Wrap-It-Heat (type SRX-30) heating band. The tank is 17.5″ diameter x 24.75″ deep (approximately 27 gallons, (100 litres)). It has a side bottom 2″ outside diameter

Volumetric

Volumetric Cup Filler

Item #: 21962

4 pocket volumetric cup filler with current cups size of 3.5″ diameter x 6″ deep. The turret can be adjusted up or down to fill from approximately 330 ml to

Metal Detectors

Metal detector with Reject

Item #: 21960

All stainless steel metal detector with washdown motor. The aperture is 14″ wide x 5″ tall to the belt (6 1/8″ tall overall. The conveyor belt is 12″ wide x

Bowl Choppers

Vertical Cutter Mixer

Item #: 21959

All stainless steel. The hopper is 14″ diameter x 11.5″ deep. It has a 2 blade assembly inside, the top blade is 2″ up from the bottom of the bowl.

Lab Equipment

Dissolution Unit

Item #: 21963

This unit comes with 8 total glasses. 2 have small chips on the lip but the sides are fine. It comes with an extra set of stirrers. In good working

L-Bar Sealers

Semi Automatic L-Bar Sealer and Tunnel Combo

Item #: 21956

Semi automatic l-bar sealer with 14″ wide x 18″ long seal area. With an electromagnetic seal jaw hold down and film perforator roller for vent holes. The tunnel is 16″

Combination

14 Head Combination Scale

Item #: 21954

Stainless steel dimple bucket 14 head combination weigher. The bucket size is 1600 ml. It has a max weight up to 6500 g and a single bucket weigh range of

COP Tanks

COP Tank

Item #: 21953

All stainless steel COP tank. The tank is 47.75″ wide x 120″ long x 27″ deep (inside measurements). It has a 2″ lip around the entire top edge. The bottom

Lightnin Style

Mixer

Item #: 21952

This mixer takes a 0.75″ diameter shaft. It has the bracket to be clamp mounted but the clamp is missing. In good condtion. Last used in a pharmaceutical facility.

Lightnin Style

Mixer

Item #: 21138

Clamp mounted Lightnin mixer. It has a 7/8″ diameter shaft that’s 48″ long. The impeller blades are 6″ long. I needs a good scrub cause the paint is flaking off

Pack-Off

Pack-Off conveyor

Item #: 21136

This pack-off conveyor is 480″ long x 35″ wide overall. The belt is 455″ long x 16″ wide. It has an ariline and 110 volt plugs that run down the

Pack-Off

Conveyor

Item #: 21133

All stainless steel pack off conveyor. It's 32" wide with a 11" wide belt running down the centre x 420" long (395" long belt section). Variable speed controls. It has

Complete Lines

Turntable, Filler, Capper

Item #: 21135

All stainless steel system. Bottle feed table (model GP-1000, serial 2813-01) is 39.75" diameter with variable speed controls. It feeds the 6 head in line piston filler (serial 2030cy0074). The hopper

Kettles

Self Contained Kettle

Item #: 21134

Kettle is 21" diameter x 18" deep. It has a removable lid. Kettle tilts and has a lock for the upright position so you can't pull it over. There is

New Arrivals

Are you interested in this product?