Menu
Our Inventory

Products

Mixer

Item #: 21976

Clamp mounted mixer. Takes a 19 mm shaft. Has on / off switch. In good working condition. Last used in a food facility. 

View Product »

Auger Powder Filler with Screw Auger Feeder

Item #: 21973

Mateer auger powder filler with screw auger feeder. The filler has a hopper with agitation and a lever sensor to start and stop the feeder. It has 1″ tooling (comes

View Product »

Semi Automatic Bundler & Tunnel

Item #: 21972

Damark semi-automatic sleeve wrapper with Damark S24 shrink tunnel. An operator is required to push the product through the film and activate the sealing system. Top speed of 8 per

View Product »

Single Head Piston Filler

Item #: 21397

Air operated single head piston filler on a stand. The hopper is 22″ diameter x 17″ deep. It has a 1 litre piston. The nozzle is 3/8″ diameter and comes

View Product »

Inline Automatic Shrink Bundler

Item #: 21971

Last running 12 and 24 packs of 0.5 litre PET bottles and 12 packs of 1 litre PET bottles. It’s capable of running pad + film, or film only. It

View Product »

Electronic Tablet / Capsule Counter

Item #: 21969

Electronic channel counter. Dual tray 16 vibratory feeding tracks. Complete with product hopper, syntron vibrators, vacuum pick-off, discharge funnel, also comes with bottle indexing. There is no conveyor with the

View Product »

Single Wall Tank

Item #: 21966

Stainless steel tank with Wrap-It-Heat (type SRX-30) heating band. The tank is 17.5″ diameter x 24.75″ deep (approximately 27 gallons, (100 litres)). It has a side bottom 2″ outside diameter

View Product »

Volumetric Cup Filler

Item #: 21962

4 pocket volumetric cup filler with current cups size of 3.5″ diameter x 6″ deep. The turret can be adjusted up or down to fill from approximately 330 ml to

View Product »

Metal detector with Reject

Item #: 21960

All stainless steel metal detector with washdown motor. The aperture is 14″ wide x 5″ tall to the belt (6 1/8″ tall overall. The conveyor belt is 12″ wide x

View Product »

Vertical Cutter Mixer

Item #: 21959

All stainless steel. The hopper is 14″ diameter x 11.5″ deep. It has a 2 blade assembly inside, the top blade is 2″ up from the bottom of the bowl.

View Product »

Dissolution Unit

Item #: 21963

This unit comes with 8 total glasses. 2 have small chips on the lip but the sides are fine. It comes with an extra set of stirrers. In good working

View Product »

Semi Automatic L-Bar Sealer and Tunnel Combo

Item #: 21956

Semi automatic l-bar sealer with 14″ wide x 18″ long seal area. With an electromagnetic seal jaw hold down and film perforator roller for vent holes. The tunnel is 16″

View Product »

14 Head Combination Scale

Item #: 21954

Stainless steel dimple bucket 14 head combination weigher. The bucket size is 1600 ml. It has a max weight up to 6500 g and a single bucket weigh range of

View Product »

COP Tank

Item #: 21953

All stainless steel COP tank. The tank is 47.75″ wide x 120″ long x 27″ deep (inside measurements). It has a 2″ lip around the entire top edge. The bottom

View Product »

Mixer

Item #: 21952

This mixer takes a 0.75″ diameter shaft. It has the bracket to be clamp mounted but the clamp is missing. In good condtion. Last used in a pharmaceutical facility.

View Product »

Mixer

Item #: 21138

Clamp mounted Lightnin mixer. It has a 7/8″ diameter shaft that’s 48″ long. The impeller blades are 6″ long. I needs a good scrub cause the paint is flaking off

View Product »

Pack-Off conveyor

Item #: 21136

This pack-off conveyor is 480″ long x 35″ wide overall. The belt is 455″ long x 16″ wide. It has an ariline and 110 volt plugs that run down the

View Product »

Conveyor

Item #: 21133

All stainless steel pack off conveyor. It's 32" wide with a 11" wide belt running down the centre x 420" long (395" long belt section). Variable speed controls. It has

View Product »

Turntable, Filler, Capper

Item #: 21135

All stainless steel system. Bottle feed table (model GP-1000, serial 2813-01) is 39.75" diameter with variable speed controls. It feeds the 6 head in line piston filler (serial 2030cy0074). The hopper

View Product »

Self Contained Kettle

Item #: 21134

Kettle is 21" diameter x 18" deep. It has a removable lid. Kettle tilts and has a lock for the upright position so you can't pull it over. There is

View Product »
  • FOOD
  • PHARMACEUTICAL
  • COSMETICS

Streamline your operations with our high-quality, pre-owned production equipment. Upgrade your workflow and boost efficiency without the burden of new purchases.

Sell Equipment

Buy Equipment

Mixer
Product #21976

Are you interested in this product?