316 stainless steel. The mixer is 36" wide x 30" long x 36" deep. Approximately 15 cubic foot working capacity. The lid lifts up and down with an air cylinder
Triangle vertical form fill and seal machine with Triangle scales. Last used packaging candies and snacks. Was running 200 gram bags at approx. 85 bags per minute. Bagger has 12"
100 litre capacity stainless steel discharge system for viscous products. Drum is smooth-walled 450 mm. diameter with torispherical bottom. 316L stainless steel, #4 polish and all welds ground smooth with
This tank has a clamp down removable lid with 3 – 2" outside diameter sani clamp connection inlets (one has a filter vent attached to it). It has a 31"
50 gallon stainless steel liquifier. New mechanical seals. It has 2 – 2" outside diameter sani clamp connection inlets in the top as well as a 18" manway. The manway
200 litre capacity stainless steel discharge system for viscous products. Drum is smooth walled, 560 mm diameter with torispherical bottom. 316L stainless steel, #4 polish and all welds ground smooth
All stainless steel case sealer on casters. It has refurbished top and bottom tape heads. Hand crank adjustments for width and height of case. It has a control box mounted on the
This is an electrically heated jacketed kettle with double motion scrape surface mixer and emulsifier with vacuum capabilities. The kettle is 18" diameter x 20.25" deep (50 litre capacity). The
Mild steel power roller conveyor. It has 20.75" wide metal rollers. It's approximately 78" long (down the centre). The rollers are currently 28.25" from the floor but it has height
This stainless steel cap sorter has a 24" wide belt. The cleats are 1.5" tall x 0.5" thick. The spacing between cleats is 4.5". The hopper is 24" wide x
16 Station rotary tablet press that was used for R&D purposes. Updated controls with a variable speed controller. It's rated at 12,000 to 22,000 tablets per hour. In good working
All stainless steel single wall tank with cone bottom. The tank is 76" diameter with a 60" sidewall and a 8" deep cone. Approximately 1300 gallons. It comes with a
All stainless steel single wall tank with a dimple jacketed cone bottom. The tank is 60" diameter with a 72" sidewall and a 12" deep cone. Approximately 925 gallons. The
All stainless steel transfer pump. The pump would lower into your bowl and pump out the contents. It has a 6.5" outside diameter outlet with a funnel reducer down to
This pump has a speed dial controller with a 3 way switch to go from forward, off or reverse. It has variable speed controls. It comes with a Easy-Load Masterflex
This pump has stainless steel contact parts. The inlet is 1.5" inside diameter threaded connection. It has a 0.75" diameter threaded connection on it currently. The outlet is 1" inside
Capable of producing up to 72,000 caps/hr. Includes two sets of size "0" tooling. The base is painted in FDA approved steel-it paint. Includes interlocking upper safety guarding and Becker
Streamline your operations with our high-quality, pre-owned production equipment. Upgrade your workflow and boost efficiency without the burden of new purchases.
-1692125800.jpeg)
-1692035984.jpeg)
