Home Who We Are Send an Inquiry Subscribe Contact Us

Inventory

Products → Form Fill & Seal

Semca Horizontal Flow Wrapper


View DetailsModel: C.O.120
Form Fill & Seal → Horizontal

Machine was used as a back up unit. Currently set for a 6" pitch. 8" wide sealing jaws. Eye for printed film. Infeed conveyor is approx. 6' long. On casters.

Cryovac Form Fill and Seal for Liquids


View DetailsModel: Onpac 2002A
Form Fill & Seal → Vertical

Stainless steel form fill and seal machine for pumpable products. It comes with 3 sets of formers for 13.75" wide film, 16.5" wide film and 20" wide film. There is also a cart to hold and move the formers. The back seal is 19" long and the sealing jaws are 13" wide. It has a 11.75" high discharge from the floor. There are two film web holders. The controls are Mitsubishi. Last used in a food facility.  There are lots parts that come with the machine as well, including jaws, air cylinders, even a plc. In good working condition.

JDA Form Fill and Seal with Single Head Scale


View DetailsModel: Redeepac 520
Form Fill & Seal → Vertical

Our customer purchased this unit new in the Spring of 2019 do run his delicate short bread cookies. They installed it and ran trials on it and they found it was not right for their application. It comes with the following:

JDA MODEL – SF Net Weigher,  JDA  Smart Elevator conveyor to feed Bagger, JDA redeepac 520 Vertical Form Fill and Seal Machine, cleated take away conveyor from bagger and JDA rotary accumulation table. 

This system only has 2 hours and 40 minutes on it.  If you are looking for a system, here is an opportunity for you to get nearly new equipment and save some money. Foot print as set up in photos is 12' 6" wide x 14' long. Full specs available on request.

General Form Fill and Seal with Servo Auger


View DetailsModel: 48WACQ
Form Fill & Seal → Vertical

Vertical form fill and seal machine comes with a metal detector, check weigher and discharge conveyor.

The bagger is a General with an AS&E model M75 servo auger filler. The jaws are 15" wide and has attachments for a gusseted bag. It has a 20" long back seal. It has an eye for registered film and it comes with a Videojet Data Flex Plus coder to print on the film. The discharge conveyor is 6' long x 16" wide. There are 4 sets of forming tubes. 3 square and 1 round.

The metal detector is a Goring Kerr TEK-DSP metal detector with an aperature of 10" wide x 4.75" tall to the belt (6" tall overall). It has an air blow off reject. Rejected items go into a bin that has a door at the bottom to empty it out. Service sticker expired Nov / 21.

The check weigher is a Mettler Toledo Hi-Speed Check Mate2 model # CX2411-GT. The infeed belt and load cell belts are 13" long x 7 1/2" wide and the exit belt is 16" long x 7 1/2" wide. 

All components are integrated with the General form fill and seal machine. Last running oats.