Home Who We Are Send an Inquiry Subscribe Contact Us

Inventory

Products → Tanks & Totes

GEI Gallay Tote / Powder Tank


View Details
Tanks & Totes → Drums or Totes

All stainless steel tank. 7.75" top centre inlet. Pyramid shape tank. 8" tall sidewall, 34.5" long slanted walls to discharge. 7.75" diameter bottom centre discharge. Tank is 35" wide x  43" long x 41" tall. Approximately 11 cubic feet capacity. It has an air operated vibrator on one side of tank. Has fortlift pockets for easy moving. Unit is stackable. In very nice condition.

Custom Metalcraft Inc. Powder Tote


View DetailsModel: 514818
Tanks & Totes → Drums or Totes

All stainless steel powder tote. Has a 18" inside diameter manway on the top. Manway has a 7.75" inside diameter inlet with sani-clamp connection in the cover. It has a 9.5" diameter bottom centre discharge with butterfly valve. Tote is 35.5" long x 30" wide x 31" deep. Tote sits on a stainless steel frame on casters with push bar at either end for easy moving. In excellent condition.

Custom Metalcraft Inc. Powder Tote


View DetailsModel: 514819
Tanks & Totes → Drums or Totes

All stainless steel powder tote. Has a 18" inside diameter manway on the top. Manway has a 7.75" inside diameter inlet with sani-clamp connection in the cover. It has a 9.5" diameter bottom centre discharge with butterfly valve. Tote is 24" long x 21.5" wide x 20.5" deep. Tote sits on a stainless steel frame on casters with push bar at either end for easy moving. In excellent condition.

Jacketed Tank


View Details
Tanks & Totes → Vertical Tanks

All stainless steel jacketed holding tank. Used to hold liquid nitrogen. The outer tank is 39.75" diameter x 28.5" deep (approximately 500 litres). It has a 6" diameter inlet and a 1" diameter bottom centre outlet that drains out the side. The inner tank is 23.5" diameter x 24" deep. There is no outlet in the inner tank. The outer tank is on casters and has handles on one side for easy moving. In very nice condition.

Mueller Horizontal Bulk Milk Tank


View DetailsModel: 1500 OP
Tanks & Totes → Horizontal Tanks

Stainless steel horizontal bulk milk tank. Last used in the cheese industry. Dimensions are approx. 120" long x 79.5" wide x 60" high. There is a 2.5" diameter sani clamp outlet that's approx.11.5" from the floor. The top has an 18" manway with cover and has an agitator in the centre. This unit is missing the drive motor. In good condition.

Mueller Horizontal Bulk Milk Tank


View DetailsModel: 1500 OP
Tanks & Totes → Horizontal Tanks

Stainless steel horizontal bulk milk tank. Last used in the cheese industry. Dimensions are approx. 120" long x 79.5" wide x 60" high. There is a 2.5" diameter sani clamp outlet that's approx.11.5" from the floor. The top has an 18" manway with cover and has an agitator in the centre. In good condition.

Mueller Horizontal Bulk Milk Tank


View DetailsModel: 1500 OP
Tanks & Totes → Horizontal Tanks

Stainless steel horizontal bulk milk tank. Last used in the cheese industry. Dimensions are approx. 120" long x 79.5" wide x 60" high. There is a 2.5" diameter sani clamp outlet that's approx. 11.5" from the floor. The top has an 18" manway with cover and has an agitator in the centre. In good condition.

Vertical Hopper / Tote


View Details
Tanks & Totes → Drums or Totes

3 identical hoppers. All stainless steel with a sight window down one side. Each has a 29.75" x 29.75" opening in the top with 2 hinged stainless doors. The hopper is 47.5" wide x 47.5" long x 80.5" deep to the centre discharge. They have a 60" side wall with a 20.5" deep 4 sided slanted bottom. The outlet is 7.5" diameter. Eash has a vabric iris valve on the discharge. 95" tall overall. They have fortlift pockets for easy moving. Last used in a food facility. They all have dints in the bottom near the outlets. Other than that they are in good condition.

10,000 Gallon Jacketed Tank


View Details
Tanks & Totes → Vertical Tanks

10,000 gallon stainless steel jacketed tank with domed top and a cone bottom. It has a 3" discharge. Has 7.5 hp sew eurodrive sweep mixer. Last used holding liquid chocolate. Approximate overall dimensions are 120" (10 feet) diameter x 300" (25 feet) tall. The tank has 46" long legs, the body is 210" tall and has a 44" high railing around the top. It's in very good condition.

Stainless Fabrication 250 Gal Jacketed Tank


View DetailsModel: 250 Gallon
Tanks & Totes → Vertical Tanks

All stainless steel tank with a dome top and a dished bottom. The top has a 18" diameter manway, 4 sani clamp inlets (2 - 2", 1, 2.5" 1, 4.75" diameter) as well as a 2" diameter sani clamp inlet with a spray ball. There is also an inlet with mounts for a mixer. The tank is 39" diameter (inside) x 59" deep. It has a 2" outside diameter sani clamp outlet, that's 18.25" from the floor. There is also a temperature probe in the bottom with a thermometer. The jacket is 2.5" thick and is rated MAWP 40 psi @ 200 deg F. MDMP -20 deg F @ 40 psi. In good condition. Last used in a food facility. National Board #823.

Tank with Mixer


View Details
Tanks & Totes → Vertical Tanks

Stainless steel tank with mild steel frame and legs. The tank has a bottom side outlet. It's 32.5" diameter x 28" deep on the high side and 30" deep at the outlet (approximately 100 gallons). The outlet is 2" diameter and has a ball valve attached with a 1" threaded outlet. The outlet is 18.5" from the floor. On casters. The Lightnin mixer (model NAG-100, serial 771598X) is air operated with a 5/8" diameter shaft with 4" impeller blades. In good working condition. The mild steel frame needs new paint.

Tank


View Details
Tanks & Totes → Vertical Tanks

Stainless steel tank with stainless steel legs on a mild steel base. The tank is 45.5" wide x 49" deep (approximately 1200 litres). It has a slanted bottom with a bottom side outlet. It is 54" deep at the discharge. The outlet is a 2" outside diameter sani clamp connection. It's had some welding done and done badly but it doesn't look like it leaks. Last used in a food facility.

Toronto Coppersmithing Tank


View Details
Tanks & Totes → Vertical Tanks

Stainless steel cone bottom tank with mild steel legs. The tank has a removable 1 piece cover with a hinge on either side of a bridge style centre. The cover has 6 various openings for a mixer or piping. The tank is 50" diameter x 59.5" deep (41.5" sidewalls, 18" cone) (approximately 400 gallons). There are 3 - 4" baffles on the sidewall of the tank. It has a 2.25" inside diameter threaded connection outlet. The outlet is 24.25" from the floor. In good condition. Last used in a food facility.

Highland Equipment Jacketed Tank


View Details
Tanks & Totes

2 identical approximately 90 gallon all stainless steel jacketed tanks. Each tank has a 1 piece removable lid with 2 - 2" outside diameter sani clamp connection inlets and a handle in the middle. The tanks are 27" diameter x 39" deep (35" sidewall & 4" cone). Each tank also has 2 - 2" outside diameter sani clamp inlets on the side wall as well as an inlet for a temperature probe. They have a 2" outside diameter sani clamp outlet that's 17.75" from the floor. Each tank sits on a stainless steel frame on casters and a handle to move around. In very good condition. Last used in a nutraceutical facility holding herbal extract.